|
|
|
General Information
|
Product Type : |
Line-interactive UPS |
Modelo : |
SMART2200NET |
Marketing Information : |
Tripp Lite"s SMART2200NET intelligent, line interactive large tower UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 27 minutes half load runtime and 11 minutes fully loaded. Runtime is expandable with optional BP24V33 external battery packs. 2200VA / 1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic applications. Includes 6 protected outlets. Supports remote monitoring of UPS and site power conditions via built-in RS-232 enabled monitoring port, plus standard UPS monitoring via 2 built in contact closure ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Supports SNMP with optional external SNMPWEBSOLO adapter. Built-in audible alarm and front panel LEDs indicate line power, battery power, battery charge level, load level, plus voltage regulation status. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive large gray tower housing. Two year warranty with $250,000 connected equipment insurance. |
Product Name : |
SmartPro 2200NET UPS |
Product Line : |
SmartPro |
|
Technical Information
|
Switching Time : |
4 ms |
Receptacles : |
6 x NEMA 5-15R |
Plug/Connector Type : |
NEMA 5-15P |
|
Power Description
|
Input Voltage : |
110V AC |
Output Voltage : |
120V AC Single-phase |
Filtering : |
EMI/RFI |
Frequency : |
60Hz |
Load Capacity : |
2200VA/1700W |
Surge Energy Rating : |
480J |
Waveform Type : |
Pulse-width Modulated Sine Wave |
Input Voltage Range : |
120V AC Single-phase |
|
Management
|
Audible Alarms : |
On Battery |
Network Manageability : |
SNMP Manageable Optional |
Overload Protection : |
20A input breaker |
|
Controls/Indicators
|
Status Indicators : |
Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information |
|
Interfaces/Ports
|
Interfaces/Ports : |
3 x DB-9 |
|
Battery Information
|
Backup/Run Time : |
11 Minute(s) 2200VA Full-load
27 Minute(s) 1100VA Half-load
|
Battery Life : |
3 Year(s) to 6 |
Battery Recharge Time : |
4 Hour(s) |
Batteries : |
Sealed Lead-acid |
|
Environmental Conditions
|
Humidity : |
0 to 95% Non-condensing Relative Humidity |
Temperature : |
32 ¦F (0 ¦C) to 104 ¦F (40 ¦C) Operating
5 ¦F (-15 ¦C) to 122 ¦F (50 ¦C) Storage
|
|
Physical Characteristics
|
Dimensions : |
17" Height x 9" Width x 12.5" Depth |
Shipping Dimensions : |
22.25" Height x 12.75" Width x 16.5" Depth |
Shipping Weight : |
87 lb |
Weight : |
80 lb |
Color : |
Gray |
Form Factor : |
Tower |
Power Cord/Cable : |
8 ft |
|
Miscellaneous
|
Additional Information : |
SMART2200NET line interactive UPS offers battery derived AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression 2200VA / 1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 27 minutes at half load (1100VA / 850 watts) and 11 minutes at full load (2200VA / 1700 watts) Runtime is further expandable with optional external BP24V33 battery packs (output VA is de-rated as external battery packs are added, see specifications) Automatic Voltage Regulation (AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V Includes 6 fully protected NEMA 5-15R outlets with 2 single outlet load banks that can be individually powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user defined script commands Offers simultaneous monitoring of up to 3 directly connected devices through included DB9 contact closure and RS-232 enabled interfaces, or the monitoring of any number of additional servers over IP with included PowerAlert monitoring software In addition to the contact closure monitoring of on battery, low battery and power restored messaging, built-in RS-232 interface supports messaging of UPS and line power status, including AC line voltage, DC battery voltage and remaining battery capacity Supports activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Diagnostic LEDs (indicate 17 performance conditions) UL (USA), cUL (Canada), NOM (Mexico), FCC Class A (Business) Listed $250,000 Ultimate Lifetime Insurance (USA & Canada Only) |
Package Contents : |
SMART2200NET UPS System PowerAlert Software and 3 6-ft. network cables Warranty information Instruction manual |
Certifications & Standards : |
UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications |
System Requirements : |
TYPICAL APPLICATIONS:Ideal for the protection of communication equipment including: routers, hubs, switches, IP-PBX, Traditional PBX and Key/Hybrid Telephone Systems. Also ideal for the protection of data processing equipment such as fileservers, workstations and other sensitive devices requiring clean, continuously regulated output power. Extended runtimes are available using additional external battery packs (BP24V33). |
Country of Origin : |
China |
|
Warranty
|
Standard Warranty : |
2 Year(s) |
|
Producto(s) Relacionado(s)
|
|---|
Power Strips
| 916000S - MULTICONTACTOS PARA RACK DE 19 13 CONTACTOS DE 15AMPS - Modelo: PDU1215
| Supresores de sobrevoltaje
| ATRM805 - RJ 45 100 Y 10BASE T-TOKEN R AS400/SYS3X RS422 (ALAMBRES 1-8 - Modelo: DNET1
| UPS Add-ons & Software
| 916000N - SENSOR DE TEMPERATURA AMBIEN PARA USO CON SNMP/WEBCARD - Modelo: ENVIROSENSE
|
|
|
